About the product
HomeControl IO14 is a device for control, automation and management of homes and buildings, or any other non-safety critical applications.
The controller is both the central and extension module of every HomeControl installation. It covers all basic functions on which a HomeControl installation is built: it provides the power supply to the bus, ensures the connection with other connected devices (dimmers, heating and cooling units) and enables remote control with a PC, smartphone or tablet. Per installation at least one connected controller is necessary. This module contains firmware that can be upgraded through internet with a wired Ethernet connection.
The hardware is universal, only one module is necessary to control multiple tasks.
The HomeControl IO14 contains all the functions, there is no need of firmware upgrade, and programming can be executed through the web browser with simple to select drop down menus and workflows.
The single module enables very simple installation, only basic electric knowledge is necessary for the installation and the programming.
This device must be mounted on a DIN rail in an electrical distribution housing (standard distribution) and may only be installed by qualified personnel.
Protection against electrical contact and fire protection must be provided in the final installation using a standards compliant/approved housing.
To turn the unit on/off during installation and in case of failure, a separator (disconnecting device) must be present. These must be easily accessible and visible.
If the unit is used in a non-conforming manner as specified by the manufacturer the product included safeguards will be impaired.
The core and distinguishing feature of HomeControl is that it’s extremely reliable. There is no central device: Each device itself is a central device and also an extension at the same time, allowing very high error tolerance. In case of failure, only that functionality is lost what was controlled by the defective device, there is no full function loss.
Star connection scheme
The HomeControl IO14 uses the star connection scheme, what means that all the switches and lights, or other controlled circuits are wired directly to the device in a star topology to make the connection extremely simple.
The HomeControl IO14 has a built-in software for programming the functionality of the device, control the device and peripheries. The entire software and functionality is accessible from a web-browser, no need to download and keep an app up-to-date every time. The software can be updated online.
The HomeControl IO14 can be used with any kind of push button, there is no need for programming and commissioning of special digital devices. One HomeControl IO14 device can handle 14 switches. The devices can be stacked to handle more switches. Each input has to use a short-push, short-release or a long-push function, this means that each input can be used for two functions. The switches are free to be used for any function: turn a light on or off, pull the shade down, dim the light, open the garage door etc.
The HomeControl IO14, by standard function, can turn lights on and off. The lights can be grouped, to make a scene and switch multiple lights at the same time. The outputs can be turned on and off with a physical push button or from the dashboard in the web browser.
Shades and blinds
The HomeControl IO14 can control your shades and blinds. 7 shades or blinds can be controlled with one device.
The HomeContorl IO14 can dim lights or change color of lights through a DMX periphery. One HomeControl IO14 with the proper DMX unit can dim up to 512 lights without using any of it’s digital outputs.
Heating and Cooling
Wired up with
Csak bejelentkezett és a terméket már megvásárolt felhasználók írhatnak véleményt.